Most of us want a smooth ride. Sometimes you may notice hand numbness due to engine vibrations. There could be a number of reasons for the vibrations of your bike. To reduce these vibrations, here are a few things you can do:
Olympia 610 Anti-vibe Gloves are available in the market at an affordable price. These gloves are made with adjustable gel for reducing the hand numbness. It gives ultimate comfort to your hands and of course the riding experience.
Fill Your Engine Oil
The friction and heat level goes up as mileage increases, thereby leading to a cranky engine. Perform regular checks on your oil levels. Lubrication of internal components is a must. Improper lubrication ups your bike's vibration. To avoid hot engine vibrations, keep your oil as full as possible. Other low oil consequences, like engine damage, can also be avoided this way.
Change Your Engine Oil
Changing the engine oil is just as important as filling it regularly. With time, your bike's oil gets thicker and dirtier. The lower flow rate makes the engine dryer. Get a well-recommended, and high-quality grade of engine oil. A dirty, hot, dry engine can significantly increase bike vibration and contribute to associated hand numbness.
Configuration of Disks and Brakes
Tight brakes can lose their grip and put pressure on the rear wheel. This, in turn,makes the engaged motorcycle run hotter, upping your bikes vibes. Check the brakes and alignment of the disks routinely, ensuring they are aligned properly, to get the shake out of your saddle.
When you make good on your regular servicing, have them check your valve tappets setting. One of the reasons for vibrations in your engine is a common fitting problem. If one is too tight or too loose, you've got a problem. The correct setting of these components needed for proper engine performance
Changing your air filters
Air filters normally don’t cause any interference in the functioning of your engine. However, clean clogged filters regularly as they can actually be a hidden cause of vibration when they're all gunked up.
Check up on your wheel chains
Chains are there to transfer the power of the engine to the wheels. Lubrication of the chain is clutch, as a too-tight chain can add more load to the engine. Extra load can create higher engine tension and make the engine vibrate. For that reason, frequent oiling and adjustment of the chain is important. Don't miss this one.
Image Source: youtube.com